Hit Enter to Search or X to close
Racer
0 - 12
Independent
+12
Agency
Racer
0 - 12
Independent
+12
Agency
Racer
0 - 12
Independent
+12
Agency
Classic
0 - 110
Independent
+110
Agency
Racer
0 - 12
Independent
+12
Agency
Racer
0 - 12
Independent
+12
Agency
Racer
0 - 12
Independent
+12
Agency
Racer
0 - 12
Independent
+12
Agency
Classic
0 - 110
Independent
+110
Agency
Racer
0 - 12
Independent
+12
Independent
Yes, all our mappers come with a two-year warranty.
1. Position the iMapper in each room to take successive measurements, keeping the doors open to allow for wall thickness. In each room, iMapper takes thousands of measurements to build up your point cloud and 5 wide angle photos.
2. Load the points from the iMapper's SD card to our platform, in order to consolidate measurements of the different parts with the help of our registration algorithm.
3. Export the point cloud as a .dxf file and open it in your favourite software (ArchiCAD, AutoCAD, Revit Sketchup...) to draw your plans over it.
Yes, you can pay for the iMapper package in 3 interest-free instalments. Contact us by email: hello@imapper.tech.
You probably replaced your drawing board with autoCAD/ArchiCAD/Revit/SketchUp twenty years ago. Today, hand drafting is still extremely expensive in terms of human time. The cost for a small architectural firm is around €15,000 per year. To be sure, do the calculation yourself, here.
In concrete terms, iMapper allows an company to save time in 3 areas:
1. When taking measurements, which is done independently. While it is operating, you can talk to your client.
2. When tracing the plan, which is done like "colouring", without hesitation or transfer of manual measurements to the computer.
3. Eliminating measurement uncertainties that would require a return to the site, or worse, errors that can significantly delay the site.
What's the difference between iMapper Racer and iMapper KitchenBoth make precise measurements and take wide-angle photos in addition to measurements. On the other hand, the iMapper Racer can map more parts on a single charge (~30), being at least 2 times faster than the Kitchen. You can see it in action here.
As for the Kitchen, it was developed in conjunction with kitchen and interior designers, and its heat-treated sensor offers a guaranteed accuracy of 2 mm on most surfaces, even glossy ones.
We recommend the Racer to architects, renovation companies, real estate agents and diagnosticians who carry out surveys of several rooms. Its speed means you can take a survey in record time. The time you save pays for itself in no time. To be sure, use our savings calculator- it's just three clicks away.
We obviously recommend the Kitchen to kitchen designers and fitters, for its level of precision and simplified handling with one knob and zero settings. You can view feedback from Kitchen users here.
The proof is in the pudding, not in the promises made by the chef! If you think the iMapper can help you plan, the best thing to do is to test it out.
In order to test the integration of the iMapper into your processes, we have created a zero risk offer: for 30 days upon receipt of goods, you will get unlimited point clouds on the platform. If it's not suitable, you can send it back to us: you will receive a full refund, including shipping costs.
Yes! complicated structures, stairs, attics, facades or a simple ceiling height, all you have to do is turn the iMapper 90° on its stand.
Our app exports your points to .dxf format, compatible with most drafting software: AutoCAD, ArchiCAD, Sketchup, Revit, VectorWorks, InSitu.
If your favourite software is not listed? Contact us, we will make the necessary developments to add it to the list.
30m indoors (i.e. 60m long rooms). 20m outdoors.
2mm on distances. 1/2000 turn on angles.
Become an expert in less than an hour with our simple guide.
This is the total number of points collected by the iMapper in a room in one scan.