iMapper integrates natively with Mozaik to give custom cabinet shops, closet designers, and casework manufacturers millimeter-accurate room measurements ready for cabinet design and CNC production. Using iMapper's laser scanner (±2mm precision), you capture complete room geometry (walls, windows, doors, and irregular surfaces) in under 3 minutes per room. The iMapper platform exports DES files, Mozaik's native room format, so room geometry opens directly in Mozaik with no conversion step, no plugin, and no tracing over a reference underlay. DXF is also available as a secondary export for any workflow that prefers generic CAD reference geometry. Unlike tape measures, iMapper eliminates measurement errors and manual transcription, delivering design-ready room data that drives downstream manufacturing with confidence. Every measurement includes 10 portrait reference photos for verifying outlet positions, pipe locations, and obstruction clearances from your desk rather than from a return visit to site.
iMapper's laser captures 1,200+ points per minute with ±2mm precision. Cabinet runs fit the first time, with no costly rework, material waste, or callbacks caused by mismeasured walls.
iMapper exports directly to DES, Mozaik's native room format. Open the file in Mozaik and start designing immediately. No plugin, no conversion, and no tracing over a reference underlay. DXF is also available when you need a generic CAD export.
Outlet positions, pipe runs, beam clearances, existing obstructions. Verify every detail from 10 portrait reference photos on the iMapper platform without returning to site.
Open the .des file directly in Mozaik. Because DES is Mozaik's native room format, the scanned room geometry loads immediately with walls, dimensions, and angles in place. No plugin, no import wizard, no tracing.
The room arrives as native Mozaik geometry. Place cabinet runs, closets, and casework on real wall positions rather than sketched measurements. Downstream pricing, cut lists, shop drawings, and CNC G-code reflect the room as it actually is.
Need to check an outlet position, a pipe clearance, or a beam before finalizing a run? Cross-reference the 10 portrait reference photos captured during scanning. No site revisit needed.
Capture existing kitchen dimensions for accurate cabinet layout, appliance placement, and countertop planning before a single cut is made.
Precise closet and wardrobe geometry for built-in cabinet fitting, especially in odd-shaped or non-square rooms where tape measures routinely miss.
Accurate room dimensions for office, hospitality, and retail casework. Reduce on-site fitting issues and manufacturing waste on larger projects.
Documented as-built conditions for built-ins, wall units, and bespoke furniture. Mozaik turns the scan into parts, cut lists, and CNC G-code without remeasuring by hand.
.png)
.png)
.png)
.png)
.png)
.png)
.png)